HP StorageWorks 2.32 Edge Switch - Manual (Page 211)

Edge Switch Element Manager user guide 211
Installing this
feature key, while
online, will cause an
IPL operation on the
switch and a momentary
loss of LAN
connection. This
operation is
non-disruptive to the
Fibre Channel traffic.
Do you wish to
continue installing
this feature key?
If the switch is on line, installing
the new feature key will cause an
internal program load (IPL). The
LAN connection to the HAFM
appliance will be lost momentarily,
but Fibre Channel traffic will not
be affected.
Click Yes to install the feature key or
No to not install.
Internal file transfer
error received from
director.
The director or switch detected an
internal file transfer error.
Retry the operation. If the problem
persists, contact the next level of
support.
Invalid character in
field.
An invalid character was entered
in the Data field.
Remove invalid characters from the
entry.
Invalid configuration
name.
You attempted to save an address
configuration name with an
invalid name.
Use up to 24 alphanumeric characters,
including spaces, hyphens, and
underscores.
Invalid feature key.
The feature key was not
recognized.
Re-enter the feature key. Ensure that
you type each character in the correct
case (upper or lower), include the
dashes, and do not add any spaces at
the end.
Invalid firmware file.
The file selected for firmware
download is not a firmware
version file.
Select the correct firmware version file
and retry the operation.
Invalid management
server address.
The IP address specified for the
HAFM appliance is unknown to
the domain name server (invalid).
Verify and enter a valid HAFM
appliance IP address.
Invalid network
address.
The IP address specified for the
product is unknown to the domain
name server (invalid).
Verify and enter a valid product IP
address.
Table 10 Element Manager messages (continued)
Message Description Action