HP StorageWorks 2.32 Edge Switch - Manual (Page 170)

Optional features 170
FICON Management Server parameters
The following provides descriptions of the parameters you can set when you configure the FICON
Management Server:
• Switch Clock Alert Mode—Click this check box to display a check mark and enable the
cock alert mode. If this is enabled, the following occurs when users set the date and time through
the Configure Date and Time dialog box (Configure menu):
• If you enable Periodic Date/Time Synchronization, an error message is displayed,
indicating that clock alert mode must be cleared to enable automatic synchronization of the
date and time.
• If you manually set the date and time (Periodic Date/Time Synchronization is not
enabled), a confirmation dialog box will display. You must click OK on that dialog box to
continue manual configuration.
• Host Control Prohibited—Click this check box to display a check mark and prohibit a host
management program from changing configuration and connectivity parameters on the switch.
In this case, the host program will only have read authorization and will not be able to make
changes. When the check mark is not displayed, a host program can change configuration and
connectivity parameters on the switch.
• Programmed offline state control—Click this check box to display a check mark and
enable a host management program to control the switch’s off line and on line state. When a
check mark is not displayed, a host program cannot set the switch on line or off line.
• Code Page—Use this option to set the language required for the port name displayed on the
Management Server. Language support is provided through character set 697 for all extended
binary-coded decimal interchange code (EBCDIC) pages.
When planning the installation, choose the EBCDIC code page for displaying host-assigned
port names or the CUP name. For example, if the code page for Italy is selected and a port
name is assigned in Italian by the host management program, the Italian language port name is
displayed in the Element Manager.
The list displays the code pages that are available for configuration. The default code page is
United States/Canada 00037. Refer to Table 8 for other code pages.
Table 8 Available code pages
Code page name Code page Hexadecimal CPGID
United States/Canada 00037 0025
Germany/Austria 00273 0111
Brazil 00275 0113
Italy 00280 0118
Japan 00281 0119
Spain/Latin America 00284 011C
United Kingdom 00285 011D