HP StorageWorks 2.32 Edge Switch - Manual (Page 188)

Information and error messages 188
Device is not a member
of a zone in the
active zone set.
The selected device is not a
member of a zone in the active
zone set and therefore cannot
communicate with the other
devices in the route.
Enable the default zone or activate a
zone set containing the member before
attempting to show the route.
Download complete.
Click OK and start the
HAFM.
Download of HAFM and the
Element Manager is complete.
Start the HAFM application to
continue.
Duplicate community
names require
identical write
authorizations.
If configuring two communities
with identical names, they must
also have identical write
authorizations.
Verify that both communities with the
same name have the same write
authorizations.
Duplicate Fabric Name.
The specified fabric name already
exists.
Select another name for the fabric.
Duplicate name in
zoning configuration.
All zone and zone set
names must be unique.
Every name in the zoning library
must be unique.
Modify (to make it unique) or delete
the duplicate name.
Duplicate nickname in
nickname
configuration.
Duplicate nicknames cannot be
configured.
Modify the selected nickname to make
it unique.
Duplicate World Wide
Name in nickname
configuration.
A WWN can be associated with
only one nickname.
Modify (to make it unique) or delete
the selected WWN.
Duplicate zone in zone
set configuration.
More than one instance of a zone
is defined in a zone set.
Delete one of the duplicate zones from
the zone set.
Duplicate zone member
in zone configuration.
More than one instance of a zone
member is defined in a zone.
Delete one of the duplicate zone
members from the zone.
Element Manager
instance is currently
open.
A product cannot be deleted
while an instance of the Element
Manager is open for that
product.
Close the Element Manager, then
delete the product.
Enabling this zone set
will replace the
currently active zone
set. Do you want to
continue?
Only one zone set can be active.
By enabling the selected zone set,
the current active zone set will be
replaced.
Click OK to continue or Cancel to end
the operation.
Table 9 HAFM messages (continued)
Message Description Action