HP StorageWorks 2.32 Edge Switch - Manual (Page 189)

Edge Switch Element Manager user guide 189
Error connecting to
switch.
While viewing routes, the HAFM
appliance was unable to connect
to the switch. The switch failed or
the switch-to-HAFM appliance
Ethernet link failed.
Try the operation again. If the problem
persists, contact the next level of
support.
Error creating zone.
The HAFM application
encountered an internal error.
Try the operation again. If the problem
persists, contact the next level of
support.
Error creating zone
set.
The HAFM application
encountered an internal error.
Try the operation again. If the problem
persists, contact the next level of
support.
Error deleting zone.
The HAFM application
encountered an internal error.
Try the operation again. If the problem
persists, contact the next level of
support.
Error deleting zone
set.
The HAFM application
encountered an internal error.
Try the operation again. If the problem
persists, contact the next level of
support.
Error reading log
file.
The HAFM application
encountered an error while trying
to read the log.
Try the operation again. If the problem
persists, contact the next level of
support.
Error removing zone or
zone member.
The HAFM application
encountered an internal error.
Try the operation again. If the problem
persists, contact the next level of
support.
Error transferring
files < message >.
An error occurred while
transferring files from the PC hard
drive to the HAFM application.
The message varies, depending
on the problem.
Try the file transfer operation again. If
the problem persists, contact the next
level of support.
Fabric Log will be
lost once the fabric
unpersists. Do you
want to continue?
When you unpersist a fabric, the
corresponding fabric log is
deleted.
Click Yes to unpersist the fabric or No
to cancel the operation.
Fabric member could
not be found.
A fabric member does not exist
when the application prepared to
find a route, find a route node, or
gather route information on that
fabric member.
Ensure the product is incorporated into
the fabric and retry the operation. If the
problem persists, contact the next level
of support.
Table 9 HAFM messages (continued)
Message Description Action