HP StorageWorks 2.32 Edge Switch - Manual (Page 192)

Information and error messages 192
Invalid World Wide
Name. Valid WWN format
is: xx:xx:xx:xx:xx:
xx:xx:xx.
The specified WWN format is
invalid. The valid format is eight
two-digit hexadecimal numbers
separated by colons (xx:xx:xx:xx:
xx:xx:xx:xx).
Retry the operation using a valid
WWN or nickname.
Invalid zone in zone
set.
The defined zone no longer exists
and is invalid.
Delete the invalid zone from the zone
set.
Limit exceeded.
You cannot add a new product or
user to HAFM application if the
maximum number of that
resource already exists on the
system.
Delete unneeded products or users
from the system, before attempting to
add any new ones.
No address selected.
You cannot complete the
operation because an address
has not been selected.
Select an address and retry the
operation.
No attached nodes
selected.
An operation was attempted
without an attached node
selected.
Select an attached node and try the
operation again.
No management server
specified.
An HAFM appliance is not
defined to the HAFM application.
At the HAFM 8 Log In dialog box, type
an appliance name in the Server
Name field and click Login.
No nickname selected.
No nickname was selected when
the command was attempted.
Select a nickname and try again.
No Element Managers
installed.
No director or switch Element
Manager is installed on this
workstation.
Install the appropriate Element
Manager to this workstation.
No routing information
available.
No information is available for
the route selected.
Select a different route and try the
operation again.
No user selected.
A user was not selected when the
command was attempted.
Select a user and try again.
No zone member
selected.
A zoning operation was
attempted without a zone
member selected.
Select a zone member and try the
operation again.
No zone selected.
A zoning operation was
attempted without a zone
selected.
Select a zone and try the operation
again.
Table 9 HAFM messages (continued)
Message Description Action