HP StorageWorks 2.32 Edge Switch User Manual
Page 195
![background image](/manuals/397514/195/background.png)
Edge Switch Element Manager user guide 195
The management server
is busy processing a
request from another
Element Manager.
The HAFM appliance is
processing a request from another
instance of an Element Manager
and cannot perform the requested
operation.
Wait until the process completes, then
perform the operation again.
The link to the
managed product is not
available.
The Ethernet connection between
the HAFM appliance and
managed product is down or
unavailable.
Establish and verify that the network
connection.
The maximum number of
aliases has already
been configured.
The maximum number of aliases
allowed has been reached.
Delete an existing alias before adding
a new alias.
The maximum number of
management server
network addresses has
already been
configured.
The number of HAFM appliance
IP addressees that can be defined
to the HAFM application has
already been configured.
Delete an existing IP address before
adding a new address.
The maximum number of
members has already
been configured.
The maximum number of unique
members is 4097. The maximum
number of members is 8192.
Delete an existing zone member before
adding a new zone member.
The maximum number of
nicknames has already
been configured.
The maximum number of
nicknames that can be defined to
the HAFM application has been
reached.
Delete an existing nickname before
adding a new nickname.
The maximum number of
open products has
already been reached.
The maximum number of open
switches allowed has been
reached.
Close an Element Manager session
(existing open product) before opening
a new session.
The maximum number of
products has already
been configured.
The number of managed HP
switches (48) that can be defined
to the HAFM application has
been reached.
Delete an existing product before
adding a new product.
The maximum number of
products of this type
has already been
configured.
The number of managed HP
switches of this type (48) that can
be defined to the HAFM
application has been reached.
Delete an existing product of this type
before adding a new product.
Table 9
HAFM messages (continued)
Message
Description
Action