HP StorageWorks 2.32 Edge Switch - Manual (Page 150)

Using logs 150
Switch Fabric Log (Advanced log)
The Switch Fabric Log includes switch fabric information as shown in Figure 67 .
Figure 67 Switch Fabric Log
Switch Fabric log displays the following information about switches in a fabric:
• Display—From the submenu, select Non-wrapping log or Wrapping log. Wrapping
log is the default.
• Date/Time—The date and time that the event occurred. The format is yyyy/mm/dd
hh:mm:ss:tt. The last two characters (hundredth of seconds) are needed due to the possibility of
a higher frequency rate of some of the advanced logs.
• Description—The description string for the event type. The string content is displayed as stored
in the log.
• Event Data—This string contains details of the event, and is variable depending on the event
logged. This is provided directly by the log content, and is displayed here exactly as received.
• Ports (RSCN only)—For Port RSCN events only, a list of affected ports is displayed in this
column. This is interpreted from port bitmap data stored in the log; and only the ports with a bit
value of 1 are listed. If there are many bits set in a large switch, the contents of this field can be
very long.