Threshold alerts log, Figure 63 threshold alerts log, Open trunking log – HP StorageWorks 2.32 Edge Switch User Manual
Page 143: 63 threshold alerts log
Edge Switch Element Manager user guide 143
Threshold Alerts Log
This log provides details of threshold alert notifications. Besides the date and time that the alert
occurred, the log also displays details about the alert, as configured through the Threshold
Alerts option under the Configure menu. To open the Threshold Alerts log, select Logs >
Threshold Alerts Log.
Figure 63
Threshold Alerts log
Each Threshold Alerts Log entry contain the following information:
•
Date/Time—Date and time stamp for when the alert occurred in yyyy/mm/dd format.
•
Name—Name for the alert, as configured through the Configure Threshold Alerts dialog box.
•
Port—Port number where the alert occurred.
•
Type—The type of alert: transmit (Tx) or receive (Rx).
•
Utilization—Percent usage of traffic capacity. This is the percent of the port’s throughput
capacity achieved by the measured throughput. This setting constitutes the threshold value and is
configured through the Configure Threshold Alerts dialog box. For example, a value of 25
means that threshold is reached when throughput reaches 25% of the port’s capacity.
•
Interval—The time interval during which the throughput is measured and an alert can
generate. This is set through the Configure Threshold Alerts dialog box.
Open Trunking Log
The Open Trunking Log displays only if the optional Open Trunking feature is installed. For details,
see”