Audit log, Figure 59 audit log, 59 audit log – HP StorageWorks 2.32 Edge Switch User Manual
Page 138
Using logs
138
Audit Log
The Audit Log displays a history of all configuration changes applied to the switch from any source,
such as Element Manager, SNMP management stations, Web server interface, host, or another
switch. To open the Audit Log, select Logs > Audit Log.
Figure 59
Audit Log
Each Audit Log entry includes the following information:
•
Date/Time—Displays the date and time of a change on the switch.
Some actions, such as backing up configuration data and enabling automatic date/time
synchronization, are performed only by the HAFM appliance without switch interaction. These
actions are indicated by the string,
Application Interface
, following the audit log’s
stamp of the appliance’s date and time (see
). If the string
Application
Interface
is not displayed, the time stamp is from the switch.
•
Action—Describes the user action that caused the configuration change, such as off line status,
port name change, or change of address.
•
Source—Identifies the user who is making the change through the switch Element Manager
and the IP or DNS host name address of the remote user’s workstation.
• Application Interface—Change was made by an Element Manager user.
• Embedded Web server—Change was made by a user through the HAFM Basic interface.
• Fabric—Change was initiated by another switch in the fabric that is not managed by this
HAFM appliance.
• Fibre Channel Host—Change was made in-band by a Fibre Channel host through the Open
Systems Management Server.
• Maintenance Port—Change was made by a user connected to the maintenance port.
• SNMP—Change was made by a remote SNMP management station.
• Telnet—Change was made through a telnet connection by the Command Line Interface.