Figure 57 export configuration dialog box, Enabling and disabling hafm basic, Enabling and disabling telnet – HP StorageWorks 2.32 Edge Switch User Manual
Page 133: 57 export configuration dialog box
Edge Switch Element Manager user guide 133
The Export Configuration Report dialog box is displayed.
Figure 57
Export Configuration dialog box
2.
Select the folder in which you want to save the file.
3.
Enter a file name and extension in the File name field.
4.
Click Save. The file is saved to the specified folder as an ASCII text file.
Enabling and disabling HAFM Basic
T
o enable and disable HAFM Basic:
•
To enable HAFM Basic, at the Hardware view, select Configure > Enable Web Server. A
check mark is automatically placed in the Enable Web Server check box.
•
To disable HAFM Basic, select Configure > Enable Web Server and click the Enable
Web Server box to remove the check mark.
When HAFM Basic is disabled, remote users cannot access the interface.
For complete procedures on using HAFM Basic, refer to McDATA EFCM Basic user guide.
Enabling and disabling Telnet
To enable and disable Telnet:
•
To enable Telnet, at the Hardware view, select Configure > Enable Telnet. A check mark is
automatically placed in the Telnet check box.
•
To disable Telnet, select Configure > Enable Telnet and click the Telnet box to remove the
check mark. When Telnet is disabled, remote users cannot access the interface.