HP StorageWorks 2.32 Edge Switch - Manual (Page 198)

Information and error messages 198
You do not have a
compatible version of
the management server
software. In order for
the HAFM application
to function properly,
a compatible version
must be installed on
the client machine.
Click OK to install a
compatible version.
The HAFM application version
running on the HAFM appliance
differs from the version running
on the remote workstation (client).
A compatible version must be
downloaded from the HAFM
appliance.
Download a compatible version of the
HAFM application to the remote
workstation (client) using the Web
install procedure.
You do not have rights
to perform this
action.
Configured user rights do not
allow this operation to be
performed.
Verify that user rights with the
customer’s network administrator and
change as required using the
Configure Users dialog box.
You must define an
SMTP server address.
An SMTP server address must be
defined and configured for e-mail
to be activated.
Define the SMTP server address at the
Configure E-Mail dialog box.
You must define at
least one E-mail
address.
At least one e-mail address must
be defined and configured for
e-mail to be activated.
Define an e-mail address at the
Configure E-Mail dialog box.
You must define at
least one remote
network address.
At least one IP address for a
remote workstation must be
configured for a remote session to
be activated.
Define an IP address for at least one
remote workstation at the Remote
Access dialog box.
You must download the
HAFM client via the
web install.
An attempt was made to
download the HAFM application
to a remote workstation (client)
using an improper procedure.
Download a compatible version of the
HAFM application to the remote
workstation (client) using the Web
install procedure.
Zones configured with
port numbers are
ignored in Open Fabric
Mode.
While in Open Fabric mode,
zones configured using port
numbers are enforced through
WWNs.
Informational message only—no action
is required.
Zones must be defined
before creating a zone
set.
You cannot create a zone set
without any zones defined for
HAFM.
Define zones using the New Zone
dialog box.
Table 9 HAFM messages (continued)
Message Description Action