Collecting maintenance data – HP StorageWorks 2.32 Edge Switch User Manual
Page 155
Edge Switch Element Manager user guide 155
NOTE:
After the port swap is complete, the contents of either the Port Number or Port Address
fields are swapped. This depends on which field was originally selected in the beginning. If the
Port Number was selected in the beginning, information for both the Port Number and Port
Address fields are swapped. If the Port Address was selected in the beginning, the Port
Address stays the same and the Port Number information is swapped.
10.
If you are finished configuring the director, back up the configuration data. For more
information, see ”
Backing up and restoring configuration
NOTE:
Make sure that the system administrator varies devices offline that are attached to the ports
whose addresses you are going to swap.
NOTE:
Ports that you are going to swap are blocked during this procedure, as swapping ports is
disruptive to port operation.
Collecting maintenance data
The Data Collection option enables you to collect maintenance data that can help support
personnel diagnose system problems. Save this data to a zip file on a CD (or other medium with the
appropriate capacity), and forward it to technical support personnel.
NOTE:
If the Full Volatility feature has been enabled through the switch's maintenance port, a
memory dump file will not be included with the data collection.
To use this option, follow the detailed steps in the appropriate service manual for your Edge Switch.