IAI America MSCON - Manual (Page 292)

Chapter 8
Troubleshooting
284
(14) Treatment
Note1 The time of alarm generated can be recorded if the clock is set to the current time on
Gateway Parameter Setting Tool.
The date and time data set once is retained for about 10 days if the power supply of
the controller is OFF. If the setting is not conducted or the time data is lost, it will be the
time passed since 2000/1/1, 00:00:00 when the power is turned ON. Even if the date
and time data is lost, the generated error code is retained.
Alarms subject to this function only include those in 8.4 Alarm but do not include errors
in the teaching tool such as PC software.
Request: In troubleshooting, exclude normal portions from suspicious targets to
narrow down the causes. Check 1) to 12) described above before
contacting us.