IAI America MSCON - Manual (Page 29)

Chapter 1 Specifications Check
21
Chapter 1 Specifications Check
1.1 Product Check
1.1.1 Parts
The standard configuration of this product is comprised of the following parts.
If you find any fault in the contained model or missing parts, contact us or our distributor.
No. Part Name Model Quantity Remarks
1 Controller
Refer to “How to read the model
plate”, “How to read the model”
1
Accessories
2
Control Power Supply
Connector
MC1.5/5-STF-3.81
(Supplier: PHOENIX CONTACT)
1
3
Motor Power Supply
Connector
GMSTB2.5/3-STF-7.62
(Supplier: PHOENIX CONTACT)
1
4 System I/O Connector
FMCD1.5/4-ST-3.5
(Supplier: PHOENIX CONTACT)
1
5
CC-Link Connector
(For CC-Link Type)
SMSTB2.5/5-ST-5.08 AU
(Supplier: PHOENIX CONTACT)
1
6
DeviceNet Connector
(For DeviceNet Type)
SMSTB2.5/5-ST-5.08 AU
(Supplier: PHOENIX CONTACT)
1
7
Absolute Battery Unit
(Absolute Type)
(Battery AB-5) 1
Number of batteries is
determined by the number
of axes to be connected.
8 First Step Guide 1
9 Instruction Manual (DVD) 1
10 Safety Guide 1
1.1.2 Teaching Tool
For the setup operation such as position setting and parameter setting by a teaching, conduct it
on PC software.
Prepare a teaching tool such as PC software and so on for the operations and tunings.
No. Part Name Model
1
PC Software
(Includes RS232C Exchange Adapter + Peripheral Communication
Cable)
RCM-101-MW
2
PC Software
(Includes USB Exchange Adapter + USB Cable + Peripheral
Communication Cable)
RCM-101-USB
3 Teaching Pendant (Touch panel teaching) CON-PTA
4
Teaching Pendant
(Touch panel teaching equipped with a deadman switch)
CON-PDA
5
Teaching Pendant
(Touch panel teaching equipped with a deadman switch + TP adapter
(RCB-LB-TG))
CON-PGA
6 Teaching Pendant CON-T
7
Teaching Pendant (equipped with dead man’s switch + TP adapter
(RCB-LB-TG))
CON-TG
8 Gateway Parameter Setting Tool –