PLANET WGSW-50040 - Manual (Page 84)

2.13 debug cluster packets
Command:
debug cluster packets {DP | DR | CP} {receive | send}
no debug cluster packets {DP | DR | CP} {receive | send}
Function:
Enable the debug information; the no command disables the debug switch.
Parameters:
DP: discovery messages.
DR: responsive messages.
CP: command messages.
receive: receive messages.
send: send messages.
Default:
None.
Command Mode:
Admin Mode.
Usage Guide:
Enable the debug information of cluster messages. After enabling classification, all DP, DR and CP
messages sent or received in the cluster will be printed.
Example:
Enable the debug information of receiving DP messages.
Switch#debug cluster packets DP receive
2.14 show cluster
Command:
show cluster
Function:
Display cluster information of the switch.
Command Mode:
Admin and Configuration Mode.
Example:
Execute this command on switches of different roles.
Switch#show cluster
Status: Enabled