PLANET WGSW-50040 - Manual (Page 65)

1.4.18 snmp-server securityip
Command:
snmp-server securityip {enable | disable}
Function:
Enable/disable the safety IP address authentication on NMS manage station.
Command Mode:
Global Mode
Default:
Enable the safety IP address authentication function.
Example:
Disable the safety IP address authentication function.
Switch(config)#snmp-server securityip disable
1.4.19 snmp-server view
Command:
snmp-server view {include | exclude}
no snmp-server view [ ]
Function:
This command is used to create or renew the view information; the “no" form of this command
deletes the view information.
Command Mode:
Global Mode.
Parameter:
view name, containing 1-32 characters.
<oid-string>is OID number or corresponding node name, containing 1-255 characters.
include | exclude, include/exclude this OID.
Usage Guide:
The command supports not only the input using the character string of the variable OID as
parameter. But also supports the input using the node name of the parameter.
Example:
Create a view, the name is readview, including iso node but not including the iso.3 node
Switch (config)#snmp-server view readview iso include
Switch (config)#snmp-server view readview iso.3 exclude
Delete the view