PLANET WGSW-50040 - Manual (Page 148)

show mac-address-table [static | blackhole | multicast | aging-time <aging-time> | count]
[address <mac-addr>] [vlan ] [count] [interface ]
Function:
Show the current MAC table.
Parameter:
static static entries;
blackhole filter entries;
aging-time <aging-time> address aging time;
count entry’s number,
multicast multicast entries;
entry’s MAC address;
entry’s VLAN number;
entry’s interface name.
Command mode:
Admin Mode and Configuration Mode.
Default:
MAC address table is not displayed by default.
Usage guide:
This command can display various sorts of MAC address entries. Users can also use show
mac-address-table to display all the MAC address entries.
Example:
Display all the filter MAC address entries.
Switch#show mac-address-table blackhole
8.2 Commands for Mac Address Binding configuration
8.2.1 clear port-security dynamic
Command:
clear port-security dynamic [address <mac-addr> | interface <interface-id>]
Function:
Clear the Dynamic MAC addresses of the specified port.
Command mode:
Admin Mode.
Parameter:
stands MAC address;
<interface-id> for specified port number.