PLANET WGSW-50040 - Manual (Page 358)

Commands for Security Function Chapter 6 Commands for TACACS+
Switch(Config)# dot1x web redirect enable
22.28 show dot1x
Command:
show dot1x [interface <interface-list>]
Function:
Displays dot1x parameter related information, if parameter information is added, corresponding
dot1x status for corresponding port is displayed.
Parameters:
is the port list. If no parameter is specified, information for all ports is displayed.
Command mode:
Admin and Configuration Mode.
Usage Guide:
The dot1x related parameter and dot1x information can be displayed with “show dot1x” command.
Example:
Display information about dot1x global parameter for the switch.
Switch#show dot1x
Global 802.1x Parameters
reauth-enabled no
reauth-period 3600
quiet-period 10
tx-period 30
max-req 2
authenticator mode passive
Mac Filter Disable
MacAccessList :
dot1x-EAPoR Enable
dot1x-privateclient Disable
dot1x-unicast Disable
dot1x-web authentication Enable
802.1x is enabled on ethernet Ethernet1/1
Authentication Method:Port based
Max User Number:1