PLANET WGSW-50040 - Manual (Page 31)

No login by default
Usage guide:
By using this command, users have to enter the password set by password command to enter
normal user mode with console; no login cancels this restriction.
Example:
Enable password
Switch(config)#login
1.1.17 password
Command:
password [0|7]
no password
Function:
Configure the password used for enter normal user mode on the console. The “no password”
command deletes this password.
Parameter:
password is the configured code. Encryption will be performed by entering 8.
Command mode:
Global mode
Default:
This password is empty by system default
Usage guide:
When both this password and login command are configured, users have to enter the password set
by password command to enter normal user mode on console.
Example:
Switch(config)#password 0 test
Switch(config)#login
1.1.18 reload
Command:
reload
Function:
Warm reset the switch.
Command mode: