PLANET WGSW-50040 - Manual (Page 413)

31.3 sntp polltime
Command:
sntp polltime
no sntp polltime
Function:
Sets the interval for SNTP clients to send requests to NTP/SNTP; the “no sntp polltime” command
cancels the polltime sets and restores the default setting.
Parameters:
is the interval value from 16 to 16284.
Default:
The default polltime is 64 seconds.
Command Mode:
Global Mode
Example:
Setting the client to send request to the server every 128 seconds.
Switch#config
Switch(config)#sntp polltime128
31.4 sntp timezone
Command:
sntp timezone [{add | subtract}] []
no sntp timezone
Function:
Set the difference between local time and UTC time. The no operation of this command cancels the
configuration timezone and restores the default value.
Parameter:
<name> is the name of local timezone, consist of max 16 characters.
means the timezone equals the UTC time add .
means the timezone equals the UTC time subtract .
<time-difference> is the time difference to UTC time, range from 0 to 12,the default value is 8 .
Default:
Add 8 is default timezone.
Command Mode:
Global Mode