PLANET WGSW-50040 - Manual (Page 196)

Class map name:c1 Name of the class map referred to
policy CIR: 1000 CBS: 1000 PIR: 200 PBS: 3000
conform-action:
transmit
exceed-action:
drop
violate-action:
drop
Policy implemented
10.21 show mls qos interface
Command:
show mls qos {interface [] [policy | queuing] | vlan } | [ begin | include
| exclude ]
Function:
Displays QoS configuration information on a port.
Parameters:
is the port ID;
: VLAN ID;
policy is the policy setting on the port;
queuing is the queue setting for the port.
Command mode:
Admin Mode.
Usage Guide:
In single rate single bucket mode, the messages can only red or green when passing police. In the
print information, in-profile means green and out-profile means red. In dual bucket mode, there are
three colors of messages. But the counter can only count two kinds of messages, the red and yellow
ones will both be treated as out-profile. Only when configuring ingress policies, there is statistic
information.
Example:
Switch #show mls qos interface ethernet 1/2
Ethernet 1/2
Default COS：0
Trust：COS DSCP EXP
Attached Policy Map for Ingress: p1
Classmap classified in-profile out-profile (in packets)