PLANET WGSW-50040 - Manual (Page 242)

Commands for Security Function Chapter 6 Commands for TACACS+
command to the client.
Example:
Specifying the IP address 10.1.128.160 to be bound to user with the unique id of 00-10-5a-60-af-12
in manual address binding.
Switch(dhcp-1-config)#client-identifier 00-10-5a-60-af-12
Switch(dhcp-1-config)#host 10.1.128.160 24
Related Command:
Host
15.1.6 debug ip dhcp server
Command:
debug ip dhcp server { events | linkage | packets }
no debug ip dhcp server { events | linkage | packets }
Function:
Enables DHCP server debug information: the “no debug ip dhcp server { events | linkage |
packets }” command disables the debug information for DHCP server.
Default:
Debug information is disabled by default.
Command mode:
Admin Mode.
15.1.7 default-router
Command:
default-router <address1>[<address2>[…<address8>]]
no default-router
Function:
Configures default gateway(s) for DHCP clients; the “no default-router” command deletes the
default gateway.
Parameters:
<address1>… are IP addresses, in decimal format.
Default:
No default gateway is configured for DHCP clients by default.
Command Mode:
DHCP Address Pool Mode