PLANET WGSW-50040 - Manual (Page 254)

Commands for Security Function Chapter 6 Commands for TACACS+
DHCP clients and enable DHCP relay when DHCP server function is enabled.
Example:
Enabling DHCP server.
Switch(config)#service dhcp
15.1.25 show ip dhcp binding
Command:
show ip dhcp binding [ [] [type {all | manual | dynamic}] [count] ]
Function:
Displays IP-MAC binding information.
Parameters:
is a specified IP address in decimal format;
all stands for all binding types (manual binding and dynamic assignment);
manual for manual binding;
dynamic for dynamic assignment;
count displays statistics for DHCP address binding entries.
Command mode:
Admin and Configuration Mode.
Example:
Switch# show ip dhcp binding
IP address Hardware address Lease expiration Type
10.1.1.233 00-00-E2-3A-26-04 Infinite Manual
10.1.1.254 00-00-E2-3A-5C-D3 60 Automatic
Displayed information Explanation
IP address IP address assigned to a DHCP client
Hardware address MAC address of a DHCP client
Lease expiration Valid time for the DHCP client to hold the IP address
Type Type of assignment: manual binding or dynamic
assignment.
15.1.26 show ip dhcp conflict
Command:
show ip dhcp conflict