PLANET WGSW-50040 - Manual (Page 431)

Chapter 33 Commands for
Reload Switch after
Specified Time
33.1 reload after
Command:
reload after
Function:
Reload the switch after a specified period of time.
Parameters:
the specified time period, HH（hours）ranges from 0 to 23, MM（minutes）and SS
（seconds）range from 0 to 59.
Command Mode:
Admin mode
Usage Guide:
With this command, users can reboot the switch without shutdown its power after a specified period
of time, usually when updating the switch version. The switch can be rebooted after a period of time
instead of immediately after its version being updated successfully. This command will not be
reserved, which means that it only has one-time effect.
Example:
Set the switch to automatically reload in 10 hours and 1second.
Switch#reload after 10:00:01
Process with reboot after? [Y/N] y
Related Commands:
reload, reload cancel, show reload
33.2 reload cancel
Command:
reload cancel
Function:
Cancel the specified time period to reload the switch.