PLANET WGSW-50040 - Manual (Page 111)

Chapter 5 Commands for
Port Channel
5.1 debug lacp
Command:
debug lacp
no debug lacp
Function:
Enables the LACP debug function: “no debug lacp” command disables this debug function.
Command mode:
Admin Mode.
Default:
LACP debug information is disabled by default.
Usage Guide:
Use this command to enable LACP debugging so that LACP packet processing information can be
displayed.
Example:
Enabling LACP debug.
Switch# debug lacp
5.2 interface port-channel
Command:
interface port-channel
Function:
Enters the port channel configuration mode
Command mode:
Global Mode
Usage Guide:
On entering aggregated port mode, configuration to GVRP or spanning tree modules will apply to
aggregated ports; if the aggregated port does not exist (i.e., ports have not been aggregated), an