PLANET WGSW-50040 - Manual (Page 23)

Example:
To configure the Telnet and ssh login method to use RADIUS authentication method.
Switch(config)# authentication line vty login local radius
Relative Command:
aaa enable, radius-server authentication host, tacacs-server authentication host,
tacacs-server key
1.1.2 clock set
Command:
clock set <HH:MM:SS>
Function:
Set system date and time.
Parameter:
is the current time, and the valid scope for HH is 0 to 23, MM and SS 0 to 59;
is the current year, month and date, and the valid scope for YYYY is 1970~2038,
MON meaning month, and DD between 1 to 31.
Command mode:
Admin Mode.
Default:
upon first time start-up, it is defaulted to 2001.1.1 0: 0: 0.
Usage guide:
The switch can not continue timing with power off, hence the current date and time must be first set
at environments where exact time is required.
Example:
To set the switch current date and time to 2002.8.1 23: 0: 0:
Switch#clock set 23:0:0 2002.8.1
1.1.3 config
Command:
config [terminal]
Function:
Enter Global Mode from Admin Mode.
Parameter:
[terminal] indicates terminal configuration.