PLANET WGSW-50040 - Manual (Page 321)

Commands for Security Function Chapter 6 Commands for TACACS+
number from 0-255;
, name of time range
Command Mode:
Global mode
Default Configuration:
No access-list configured.
Usage Guide:
When the user assign specific for the first time, ACL of the serial number is created, then the
lists are added into this ACL; the access list which marked 3200-3299 can configure not continual
reverse mask of IP address.
Examples:
Permit the passage of TCP packet with source MAC 00-12-34-45-XX-XX, any destination MAC
address, source IP address 100.1.1.0 0.255.255.255, and source port 100.
Switch(config)#access-list 3199 permit 00-12-34-45-67-00 00-00-00-00-FF-FF
any-destination-mac tcp 100.1.1.0 0.255.255.255 s-port 100 any-destination
21.7 access-list(mac standard)
Command:
access-list {deny|permit} {any-source-mac | {host-source-mac } |
{ } }
no access-list
Functions:
Define a standard numeric MAC ACL rule, ‘no access-list ’ command deletes a standard
numeric MAC ACL access-list rule.
Parameters:
is the access-list No. which is a decimal’s No. from 700-799;
deny if rules are matching, deny access;
permit if rules are matching, permit access;
, source MAC address;
mask (reverse mask) of source MAC address.
Command Mode:
Global mode
Default Configuration:
No access-list configured.
Usage Guide: