PLANET WGSW-50040 - Manual (Page 117)

system System ID
system priority System Priority
LACP activety Whether port is added to the group in active mode, 1 for yes.
LACP timeout Port timeout mode, 1 for short timeout.
Aggregation Whether aggregation is possible for the port, 0 for independent port that
does not allow aggregation.
Synchronization Whether port is synchronized with the partner end.
Collecting Whether status of port bound status machine is collecting or not.
Distributing Whether status of port bound status machine is distributing or not.
Defaulted Whether the local port is using default partner end parameter.
Expired Whether status of port receiving status machine is expire or not.
Selected Whether the port is selected or not..
5. Display port-channel information for port-group1.
Switch# show port-group 1 port-channel
Port channels in the group 1:
-----------------------------------------------------------
Port-Channel: port-channel1
Number of port : 2 Standby port : NULL
Port in the port-channel :
Index Port Mode
------------------------------------------------------
1 Ethernet1/1 active
2 Ethernet1/2 active
Displayed information Explanation
Port channels in the group If port-channel does not exist, the above information will not be
displayed.
Number of port Port number in the port-channel.
Standby port Port that is in “standby” status, which means the port is qualified to join
the channel but cannot join the channel due to the maximum port limit,
thus the port status is standby instead of selected.