PLANET WGSW-50040 - Manual (Page 359)

Commands for Security Function Chapter 6 Commands for TACACS+
Status Authorized
Port-control Auto
Supplicant 00-30-4F-FE-2E-D3
Authenticator State Machine
State Authenticated
Backend State Machine
State Idle
Reauthentication State Machine
State Stop
802.1X is enabled on ethernet Ethernet1/16
Authentication Method: web based
Status Authorized
Port-control Auto
Supplicant IP 192.168.1.11
VLAN id 2
Displayed information Explanation
Global 802.1x Parameters Global 802.1x parameter information
reauth-enabled Whether re-authentication is enabled or not
reauth-period Re-authentication interval
quiet-period Silent interval
tx-period EAP retransmission interval
max-req EAP packet retransmission interval
authenticator mode Switch authentication mode
Mac Filter Enables dot1x address filter or not
MacAccessList Dot1x address filter table
Dot1x-EAPoR Authentication method used by the switch (EAP relay, EAP local
end)
802.1x is enabled on ethernet
Ethernet1/1
Indicates whether dot1x is enabled for the port
Authentication Method: Port authentication method (MAC-based, port-based)
Status Port authentication status
Port-control Port authorization status
Supplicant Authenticator MAC address
Authenticator State Machine Authenticator state machine status