PLANET WGSW-50040 - Manual (Page 243)

Commands for Security Function Chapter 6 Commands for TACACS+
Usage Guide:
The IP address of default gateway(s) should be in the same subnet as the DHCP client IP, the
switch supports up to 8 gateway addresses. The gateway address assigned first has the highest
priority, and therefore address1 has the highest priority, and address2 has the second, and so on.
Example:
Configuring the default gateway for DHCP clients to be 10.1.128.2 and 10.1.128.100.
Switch(dhcp-1-config)#default-router 10.1.128.2 10.1.128.100
15.1.8 dns-server
Command:
dns-server <address1>[<address2>[…<address8>]]
no dns-server
Function:
Configure DNS servers for DHCP clients; the “no dns-server” command deletes the default
gateway.
Parameters:
<address1>… are IP addresses, in decimal format.
Default:
No DNS server is configured for DHCP clients by default.
Command Mode:
DHCP Address Pool Mode
Usage Guide:
Up to 8 DNS server addresses can be configured. The DNS server address assigned first has the
highest priority, therefore address 1 has the highest priority, and address 2 has the second, and so
on.
Example:
Set 10.1.128.3 as the DNS server address for DHCP clients.
Switch(dhcp-1-config)#dns-server 10.1.128.3
15.1.9 domain-name
Command:
domain-name
no domain-name
Function: