PLANET WGSW-50040 - Manual (Page 68)

ftp username>
ftp password>
ftp filename>
Requesting for FTP server address, user name, password and file name
Examples:
(1) Save images in the FLASH to the FTP server of 10.1.1.1, FTP server username is Switch,
password is superuser
Switch#copy nos.img ftp://Switch:[email protected]/nos.img
(2) Obtain system file nos.img from the FTP server 10.1.1.1, the username is Switch, password is
superuser
Switch#copy ftp://Switch:[email protected]/nos.img nos.img
(3) Save images in the FLASH to the FTP server of 2004:1:2:3::6
Switch#copy nos.img ftp://username:password@2004:1:2:3::6/ nos.img
(4) Obtain system file nos.img from the FTP server 2004:1:2:3::6
Switch#copy ftp:// username:password@2004:1:2:3::6/nos.img nos.img
(5) Save the running configuration files
Switch#copy running-config startup-config
Relevant Command:
Write
1.5.2 copy（TFTP）
Command:
copy [ascii | binary]
Function:
Download files to the TFTP client.
Parameter:
is the location of the source files or directories to be copied;
is the destination address to which the files or directories to be copied; forms of
and vary depending on different locations of the files or directories.
ascii indicates the ASCII standard will be adopted; binary indicates that the binary system will be
adopted in the file transmission（default transmission method）.When URL represents an TFTP
address, its form should be: tftp://{||}/, amongst
| is the IPv4 or IPv6 address of the TFTP server/client, is
the name of the host mapping with the IPv6 address, it does not support the file download and