PLANET WGSW-50040 - Manual (Page 33)

Usage guide:
Configure the columns of characters displayed on each screen of the terminal. The columns of
characters displayed on each screen on the telent.ssh client and the Console will be following this
configuration.
Example:
Set the number of vty threads to 20.
Switch(config)#service terminal-length 20
1.1.21 sysContact
Command:
sysContact
no sysContact
Function:
Set the factory contact mode, the “no sysContact” command reset the switch to factory settings.
Parameter:
is the prompt character string, range from 0 to 255 characters.
Command mode:
Global Mode
Default:
The factory settings.
Usage guide:
The user can set the factory contact mode bases the fact instance.
Example:
Set the factory contact mode to test.
Switch(config)#sysContact test
1.1.22 sysLocation
Command:
sysLocation
no sysLocation
Function:
Set the factory address, the “no sysLocation” command reset the switch to factory settings.
Parameter:
is the prompt character string, range from 0 to 255 characters.