PLANET WGSW-50040 - Manual (Page 29)

“.
Example:
Set IP address of a host with the hostname of “beijing” to 200.121.1.1.
Switch(config)#ip host beijing 200.121.1.1
Command related:
telnet, ping, traceroute
1.1.13 ipv6 host
Command:
ipv6 host
no ipv6 host {|all}
Function:
Configure the mapping relationship between the IPv6 address and the host; the “no ipv6 host
” command deletes this mapping relationship.
Parameter:
is the name of the host, containing max 15 characters;
is the IPv6 address corresponding to the host name. is all the host address.
Command Mode:
Global Mode
Usage Guide:
Configure a fixed corresponding relationship between the host and the IPv6 address, applicable in
commands such as “traceroute6 ”, etc.
Example:
Set the IPv6 address of the host named beijing to 2001:1:2:3::1
Switch(config)#ipv6 host beijing 2001:1:2:3::1
Command related:
ping6,traceroute6
1.1.14 ip http server
Command:
ip http server
no ip http server
Function:
Enable Web configuration; the “no ip http server” command disables Web configuration