PLANET WGSW-50040 - Manual (Page 62)

Example:
Set current engine ID to A66688999F
Switch(config)#snmp-server engineid A66688999F
Restore the default engine ID
Switch(config)#no snmp-server engineid
1.4.15 snmp-server group
Command:
snmp-server group {NoauthNopriv | AuthNopriv | AuthPriv} [[read
] [write ] [notify ]] [access {|}]
[ipv6-access {|}]
no snmp-server group {NoauthNopriv | AuthNopriv | AuthPriv} [access
{|}] [ipv6-access {|}]
Function:
This command is used to configure a new group; the “no” form of this command deletes this group.
Command Mode:
Global Mode
Parameter:
> group name which includes 1-32 characters
NoauthNopriv Applies the non recognizing and non encrypting safety level
AuthNopriv Applies the recognizing but non encrypting safety level
AuthPriv Applies the recognizing and encrypting safety level
read-string Name of readable view which includes 1-32 characters
write-string Name of writable view which includes 1-32 characters
notify-string Name of trappable view which includes 1-32 characters
is the access-class number for standard numeric ACL, ranging between 1-99;
is the access-class name for standard ACL, the character string length is ranging between
1-32;
is the access-class number for standard numeric IPv6 ACL, ranging between
500-599;
is the access-class name for standard IPv6 ACL, the character string length is ranging
between 1-32.
Usage Guide:
There is a default view “v1defaultviewname” in the system. It is recommended to use this view as
the view name of the notification. If the read or write view name is empty, corresponding operation