PLANET WGSW-50040 - Manual (Page 258)

Commands for Security Function Chapter 6 Commands for TACACS+
16.3 debug ip dhcp snooping update
Command:
debug ip dhcp snooping update
no debug ip dhcp snooping update
Function:
This command is use to enable the DHCP snooping debug switch to debug the communication
information between DHCP snooping and helper server.
Command Mode:
Admin Mode.
Usage Guide:
Debug the information of communication messages received and sent by DHCP snooping and
helper server.
16.4 debug ip dhcp snooping event
Command:
debug ip dhcp snooping event
no debug ip dhcp snooping event
Function:
This command is use to enable the DHCP SNOOPING debug switch to debug the state of DHCP
SNOOPING task.
Command Mode:
Admin mode.
Usage Guide:
This command is mainly used to debug the state of DHCP SNOOPING task and available of
outputting the state of checking binding data and executing port action and so on.
16.5 debug ip dhcp snooping binding
Command:
debug ip dhcp snooping binding
no debug ip dhcp snooping binding
Function:
This command is use to enable the DHCP SNOOPING debug switch to debug the state of binding