PLANET WGSW-50040 - Manual (Page 56)

1.4.5 show snmp engineid
Command:
show snmp engineid
Function:
Display the engine ID commands.
Command Mode:
Admin and Configuration Mode.
Example:
Switch#show snmp engineid
SNMP engineID:3138633303f1276c Engine Boots is:1
Displayed Information Explanation
SNMP engineID Engine number
Engine Boots Engine boot counts
1.4.6 show snmp group
Command:
show snmp group
Function:
Display the group information commands.
Command Mode:
Admin and Configuration Mode.
Example:
Switch#show snmp group
Group Name:initial Security Level:noAuthnoPriv
Read View:one
Write View:
Notify View:one
Displayed Information Explanation
Group Name Group name
Security level Security level
Read View Read view name
Write View Write view name