6 ip multicast policy, 7 ip multicast source-control – PLANET WGSW-50040 User Manual
Page 281

Commands for Security Function Chapter 6 Commands for TACACS+
match configured access-list, such as matching: permit, the interface can be added, otherwise do
not be added.
Example:
Switch(config)#ip multicast destination-control 1 00-01-03-05-07-09 access-group 6000
18.1.6 ip multicast policy
Command:
ip multicast policy
no ip multicast policy
Function:
Configure multicast policy, the “no ip multicast policy
command deletes it.
Parameter:
separately.
Command Mode:
Global Mode
Usage Guide:
The command configuration modifies to a specified value through the switch matching priority of
specified range multicast data packet, and the TOS is specified to the same value simultaneously.
Carefully, the packet transmitted in UNTAG mode does not modify its priority.
Example:
Switch(config)#ip multicast policy 10.1.1.0/24 225.1.1.0/24 cos 7
18.1.7 ip multicast source-control
Command:
ip multicast source-control
no ip multicast source-control
Function:
Configure to globally enable multicast source control, the “no ip multicast source-control”
command restores global multicast source control disabled.
Default:
Disabled