PLANET WGSW-50040 - Manual (Page 265)

Commands for Security Function Chapter 6 Commands for TACACS+
blackhole: When the port detects a fake DHCP Server, the vid and source MAC of the fake packet
will be used to block the traffic from this MAC.
recovery: Users can set to recover after the automatic defense action being executed.(no shut
ports or delete correponding blackhole）.
second: Users can set how long after the execution of defense action to recover. The unit is second,
and valid range is 10-3600.
Command Mode:
Port mode
Default Settings:
No default defense action.
Usage Guide:
Only when DHCP Snooping is globally enabled, can this command be set. Trusted port will not
detect fake DHCP Server, so, will never trigger the corresponding defense action. When a port turns
into a trusted port from a non-trusted port, the original defense action of the port will be
automatically deleted.
Example:
Set the DHCP Snooping defense action of port ethernet1/1 as setting blackhole, and the recovery
time is 30 seconds.
switch(config)#interface ethernet 1/1
switch(Config-Ethernet1/1)#ip dhcp snooping action blackhole recovery 30
16.15 ip dhcp snooping action MaxNum
Command:
ip dhcp snooping action {|default}
Function:
Set the number of defense action that can be simultaneously take effect.
Parameters:
: the number of defense action on each port, the range of which is 1-200, and the value
of which is 10 by default.
default: recover to the default value.
Command Mode:
Globe mode
Default Settings:
The default value is 10.
Usage Guide: