PLANET WGSW-50040 - Manual (Page 435)

Example:
Set the rate of the CPU receiving the arp packets to 500pps.
Switch(config)#cpu-rx-ratelimit protocol arp 500
34.4 clear cpu-rx-stat protocol
Command:
clear cpu-rx-stat protocol []
Function:
Clear the statistics of the CPU received packets of the protocol type.
Parameter:
is the type of the protocol of the packet, including dot1x, stp, snmp, arp, telnet,
http, dhcp, igmp, ssh.
Command Mode:
Global Mode
Usage Guide:
This command clear the statistics of the CPU received packets of the protocol type, it is supposed to
be used with the help of the technical support.
Example:
Clear the statistics of the CPU receives arp packets.
Switch(config)#clear cpu-rx-stat protocol arp
34.5 show cpu-rx protocol
Command:
show cpu-rx protocol []
Function:
Show the statistics of the CPU received packets of the protocol type.
Parameter:
<protocol-type> is the protocol type of the packets, if do not input parameters, show all statistic
packets.
Command Mode:
Admin Mode