PLANET WGSW-50040 - Manual (Page 380)

AAA accounting is not enabled by default.
Usage Guide:
When accounting is enabled in the switch, accounting will be performed according to the traffic or
online time for port the authenticated user is using. The switch will send an “accounting started”
message to the RADIUS accounting server on starting the accounting, and an accounting packet for
the online user to the RADIUS accounting server every five seconds, and an “accounting stopped”
message is sent to the RADIUS accounting server on accounting end. Note: The switch send the
“user offline” message to the RADIUS accounting server only when accounting is enabled, the “user
offline” message will not be sent to the RADIUS authentication server.
Example:
Enabling AAA accounting for the switch.
Switch(config)#aaa-accounting enable
27.3 aaa-accounting update
Command:
aaa-accounting update {enable|disable}
Function:
Enable or disable the AAA update accounting function.
Command Mode:
Global Mode.
Default:
Enable the AAA update accounting function.
Usage Guide:
After the update accounting function is enabled, the switch will sending accounting message to
each online user on time.
Example:
Disable the AAA update accounting function for switch.
Switch(config) #aaa-accounting update disable
27.4 debug aaa packet
Command: