PLANET WGSW-50040 - Manual (Page 284)

Commands for Security Function Chapter 6 Commands for TACACS+
Usage Guide:
The command displays multicast destination control rules of configuration, including detail option,
and access-list information applied in detail.
Example:
Switch (config)#show ip multicast destination-control
ip multicast destination-control is enabled
ip multicast destination-control 11.0.0.0/8 access-group 6003
ip multicast destination-control 1 00-03-05-07-09-11 access-group 6001
multicast destination-control access-group 6000 used on interface Ethernet1/13
switch(config)#
18.1.11 show ip multicast destination-control
access-list
Command:
show ip multicast destination-control access-list
show ip multicast destination-control access-list <6000-7999>
Function:
Display destination control multicast access-list of configuration.
Parameter:
<6000-7999>: access-list number.
Command Mode:
Admin Mode and Global Mode
Usage Guide:
The command displays destination control multicast access-list of configuration.
Example:
Switch# sh ip multicast destination-control acc
access-list 6000 deny ip any any-destination
access-list 6000 deny ip any host-destination 224.1.1.1
access-list 6000 deny ip host 2.1.1.1 any-destination
access-list 6001 deny ip host 2.1.1.1 225.0.0.0 0.255.255.255
access-list 6002 permit ip host 2.1.1.1 225.0.0.0 0.255.255.255
access-list 6003 permit ip 2.1.1.0 0.0.0.255 225.0.0.0 0.255.255.255
18.1.12 show ip multicast policy