PLANET WGSW-50040 - Manual (Page 24)

Command mode:
Admin Mode.
Example:
Switch#config
1.1.4 debug ssh-server
Command:
debug ssh-server
no debug ssh-server
Function:
Display SSH server debugging information; the “no debug ssh-server” command stops displaying
SSH server debugging information.
Default:
This function is disabled by default.
Command mode:
Admin Mode.
Example:
Switch#debug ssh-server
1.1.5 enable
Command:
enable
disable
Function:
Enter Admin Mode from User Mode.
Command mode:
User Mode/ Admin Mode.
Usage Guide:
To prevent unauthorized access of non-admin user, user authentication is required (i.e. Admin user
password is required) when entering Admin Mode from User Mode. If the correct Admin user
password is entered, Admin Mode access is granted; if 3 consecutive entry of Admin user password
are all wrong, it remains in the User Mode. Set the Admin user password under Global Mode with
“enable password” command.
Example: