beautypg.com

Chapter 7 vlan configuration, 1 commands for vlan configuration, 1 debug gvrp – PLANET WGSW-50040 User Manual

Page 119: 2 dot1q-tunnel enable, Ommands for, Vlan, Onfiguration, 1 commands for vlan configuration 7.1.1 debug gvrp

background image

Chapter 7 VLAN

Configuration

7.1 Commands for VLAN Configuration

7.1.1 debug gvrp

Command:

debug gvrp

no debug gvrp

Function:

Enable the GVRP debugging function: the “no debug gvrp” command disables the function.

Command mode:

Admin Mode.

Default:

GVRP debug information is disabled by default.

Usage Guide:

Use this command to enable GVRP debugging, GVRP packet processing information can be

displayed.

Example:

Enable GVRP debugging.

Switch#debug gvrp

7.1.2 dot1q-tunnel enable

Command:

dot1q-tunnel enable

no dot1q-tunnel enable

Function:

Set the access port of the switch to dot1q-tunnel mode; the “no dot1q-tunnel enable” command

restores to default.

Parameter:

None.

Command Mode:

See also other documents in the category PLANET Routers: