PLANET WGSW-50040 - Manual (Page 36)

1.1.27 show tech-support
Command:
show tech-support
Function:
Display the operational information and the task status of the switch. The technique specialist use
this command to diagnose whether the switch operate normally.
Command mode:
Admin and Configuration Mode.
Usage Guide:
This command is used to collect the relative information when the switch operation is
malfunctioned.
Example:
Switch#show tech-support
1.1.28 show version
Command:
show version
Function:
Display the version information of the switch.
Command mode:
Admin and Configuration Mode.
Usage Guide:
this command is used to show the version information of the switch, including the hardware version
and the software version information.
Example:
Switch#show version.
1.1.29 username
Command:
username [privilege ] [password <0|7> ]
no username
Function:
Configure local login username and password along with its privilege level.