PLANET WGSW-50040 - Manual (Page 246)

Commands for Security Function Chapter 6 Commands for TACACS+
15.1.12 ip dhcp conflict logging
Command:
ip dhcp conflict logging
no ip dhcp conflict logging
Function:
Enables logging for address conflicts detected by the DHCP server; the “no ip dhcp conflict
logging” command disables the logging.
Default:
Logging for address conflict is enabled by default.
Command mode:
Global Mode
Usage Guide:
When logging is enabled, once the address conflict is detected by the DHCP server, the conflicting
address will be logged. Addresses present in the log for conflicts will not be assigned dynamically
by the DHCP server until the conflicting records are deleted.
Example:
Disable logging for DHCP server.
Switch(config)#no ip dhcp conflict logging
Related Command:
clear ip dhcp conflict
15.1.13 ip dhcp excluded-address
Command:
ip dhcp excluded-address []
no ip dhcp excluded-address []
Function:
Specifies addresses excluding from dynamic assignment; the “no ip dhcp excluded-address
[]” command cancels the setting.
Parameters:
is the starting IP address,
[] is the ending IP address.
Default:
Only individual address is excluded by default.
Command mode:
Global Mode