PLANET WGSW-50040 - Manual (Page 326)

Commands for Security Function Chapter 6 Commands for TACACS+
entries).
Parameter:
is the name for access list, the character string length is from 1-16.
Command Mode:
Global Mode.
Default:
No access list is configured by default.
Usage Guide:
When this command is run for the first time, only an empty access list with no entry will be created.
Example:
Create a standard IPv6 access list named “ip6Flow”.
Switch(config)#ipv6 access-list standard ip6Flow
21.15 {ip|ipv6|mac|mac-ip} access-group
Command:
{ip|ipv6|mac|mac-ip} access-group {in} [traffic-statistic]
no {ip|mac} access-group {in}
Function:
Apply an access-list on some direction of port, and determine if ACL rule is added statistic counter
or not by options; the no command deletes access-list binding on the port.
Parameter:
is the name for access list, the character string length is from 1-16.
Command Mode:
Physical Port Mode
Default:
The entry of port is not bound ACL.
Usage Guide: Usage Guide:
One port can bind ingress rules.
There are four kinds of packet head field based on concerned: MAC ACL, IP ACL, MAC-IP ACL and
IPv6 ACL; to some extent, ACL filter behavior (permit, deny) has a conflict when a data packet
matches multi types of four ACLs. The strict priorities are specified for each ACL based on outcome
veracity. It can determine final behavior of packet filter through priority when the filter behavior has a
conflict.
When binding ACL to port, there are some limits as below:
1． Each port can bind a MAC-IP ACL, a IP ACL, a MAC ACL and a IPv6 ACL;