PLANET WGSW-50040 - Manual (Page 410)

Example:
Configure the ingress sample rate on port e1/1 to 10000 and the egress sample rate to 20000.
Switch(Config-If-Ethernet1/1)#sflow rate input 10000
Switch(Config-If-Ethernet1/1)#sflow rate output 20000
30.8 show sflow
Command:
show sflow
Function:
Display the sFlow configuration state.
Command Mode:
All Modes.
Usage Guide:
This command is used to acknowledge the operation state of sFlow.
Switch#show sflow
Sflow version 1.2
Agent address is 172.16.1.100
Collector address have not configured
Collector port is 6343
Sampler priority is 2
Sflow DataSource: type 2, index 194(Ethernet1/2)
Collector address is 192.168.1.200
Collector port is 6343
Counter interval is 0
Sample rate is input 0, output 0
Sample packet max len is 1400
Sample header max len is 50
Sample version is 4
Displayed Information Explanation
Sflow version 1.2 Indicates the sFlow version is 1.2
Agent address is 172.16.1.100 Address of the sFlow sample proxy is 172.16.1.100
Collector address have not
configured
the sFlow global analyzer address is not configured