PLANET WGSW-50040 - Manual (Page 192)

Example:
Creating and deleting a policy map named “p1”.
Switch(config)#policy-map p1
Switch(Config-PolicyMap-p1)#exit
Switch(config)#no policy-map p1
10.16 set
Command:
set {ip dscp | ip precedence | internal priority |
drop precedence | cos }
no set {ip dscp | ip precedence | internal priority | drop precedence | cos}
Function:
Assign a new DSCP, IP Precedence for the classified traffic; the “no” form of this command delete
assigning the new values.
Parameter:
ip dscp <new-dscp> new DSCP value;
ip precedence <new-precedence> new IPv4 Precedence;
ipv6 dscp <new-dscp> new IPv6 DSCP value;
ipv6 flowlabel new IPv6 FL value.
cos <new cos> new COS value.
Default:
Not assigning by default.
Command Mode:
Policy Class-map Mode
Usage Guide:
Only the classified traffic which matches the matching standard will be assigned with the new
values.
Example:
Set the IP DSCP of the packets matching the c1 class rule to 3.
Switch(config)#policy-map p1
Switch(Config-PolicyMap-p1)#class c1
Switch(Config-PolicyMap-p1-Class-c1)#set ip precedence 3
Switch(Config-PolicyMap-p1-Class-c1)#exit
Switch(Config-PolicyMap-p1)#exit