PLANET WGSW-50040 - Manual (Page 151)

8.2.4 show port-security interface
Command:
show port-security interface
Function:
Display the configuration of secure port.
Command mode:
Admin Mode and other configuration Mode.
Parameter:
stands for the port to be displayed.
Default:
Configuration of secure ports is not displayed by default.
Usage Guide:
This command displays the detailed configuration information for the secure port.
Example:
Switch#show port-security interface ethernet 1/1
Port Security : Enabled
Port status : Security Up
Violation mode : Protect
Maximum MAC Addresses : 1
Total MAC Addresses : 1
Configured MAC Addresses : 1
Lock Timer is ShutDown
Mac-Learning function is : Opened
Displayed information Explanation
Port Security Is port enabled as a secure port.
Port status Port secure status.
Violation mode Violation mode set for the port.
Maximum MAC Addresses The maximum secure MAC address number set
for the port.
Total MAC Addresses Current secure MAC address number for the port.
Configured MAC Addresses Current secure static MAC address number for the
port.
Lock Timer Whether locking timer (timer timeout) is enabled
for the port.
Mac-Learning function Is the MAC address learning function enabled.