Grass Valley UniConfi NVISION Series v.1.3 - Manual (Page 80)

68 Rev 1.1 • 14 Dec 09
8. Managing Partitions and Signal Types
Setting Up Mono Signal Switching
Figure 8-8 shows typical UniConfig settings for a router using mono-only mode. For instructions
on managing mono signal partitions, see About Partitions on page 49. For details on which settings
to use for the router control system, see your router’s user’s guide.
Figure 8-8. Typical UniConfig Settings for Mono-Only Mode
If you are using the Miranda NV9000 router control system, the following tables lists recom-
mended settings. Before proceeding, it is recommended that a small portion of the device list and
corresponding physical connections data be built to test the user interface functionality.
Device Name Left Input Right Input Left Output Right Output
1
1L 1 1
1R 2 2
2
2L 3 3
2R 4 4
3
3L 1 1
3R 2 2
4
4L 3 3
4R 4 4
5